UNITACK-PT is an aqueous dispersion of polyvinyl acetate containing plasticizer. It is stable in weak acids, alkalis and optical brightening agent and miscible with hot or cold water in all proportions. UNITACK-PT may be diluted in any proportion with either soft or hard water to give good dispersion with good stability Since UNITACK-PT contains plasticizer, therefore wide range of finishes on synthetic and natural fabrics varying from stiff effects to full soft effects may be obtained. It is a APEO/NPEO free product and conforms to Oeko-tex and REACH compliance as well.
UNITACK-PT is better applied to piece goods by padding. It may be applied to knitted goods by impregnation. If desired a standing bath may be employed. The goods are finally dried using any normaly drying equipment. As a general finish an impregnation liquor containing 10-50 parts of UNITACK-PT per 1000 parts of water may be used for the production of Bucrum cloth as interline fabric for garment manufacturer. UNITACKPT can be used in combination with starch or a carboxyl methyl cellulose (CMC) product and resin UNIFIX-G to get stitness as well as pliability in the fabric. If the fabric is cured / dried properly the finish can stand for many washes, UNITACK-PT also provides effective back sizing on carpets by normal equipments The concentration for UNITACK-PT may be taken according to the desired thickness and pliability, by diluting the resin with cold water and adding directly to the size box. The treatment is carried out cold through out. Normally 10-30 g/l is recommended in padding application. Attractive full firm finishes are produced on cotton, polyester and polyester / cellulose blend fabrics by applying UNITACK-PT with softening agents or our UNISOFT range Very useful binder for lacquer printing with titanium dioxide, which leaves the printed portions soft enough.
Appearance White Thick Paste lonic character Non-ionic pH: 5.0-6.0
UNITACK-PT can be applied on woven and knitted fabric by exhaustion technique on winches or by padding method it can be applied in finishing as well.
1. Ensure that the UNITACK-PT solution is completely homogenous before using.
2. Clean inside of pad bath or exhaustion bath before applying the product and keep the mangle clean during the process.
To ensure that the product quality is maintained, the container should be tightly sealed when not in use. Store at normal temperature, and prevent prolonged exposure to extreme heat or freezing condition, which may cause product separation. If separation does occur, thaw if frozen, stir the contents, and use in the normal manner.
When considering the use of any UCI products in a particular application should review our latest Material Safety Data Sheets and ensure that the use you intend can be accomplished safely. For Material Safety Data Sheets and other product safety information, contact the UCI Sales Office nearest you. Before handling any other products mentioned in the text you should obtain relevant product safety information and take necessary steps to ensure safety of use.