UNISOFT-CS is a mild active cationic softener which gives excellent soft finishes on a wide range of fabric i.e. cotton, wool, viscose, polyester, polyamide and polyacrylic fibers. It is a APEO/NPEO free product and conforms to Oeko-tex and REACH compliance as well.
UNISOFT-CS can be used as received or pre-diluted with water before applying. The optimum treatments to reach the required softness are dependent on the fabric condition after dyeing and rinsing.
Appearance Off White to Cream Paste lonic character Cationic pH 7.0 -8.0
UNISOFT-CS can be used for finishing by padding method. It can be used safely mixed with starch, dextrin’s resins etc. and also be used for wash-n-wear finishes with precondensate resins. The softener can also be applied by padding or exhaustion finishing processes and also during the garment washing stage.
1. Ensure that the UNISOFT-CS solution is completely homogenous before using.
2.Clean inside of pad bath or exhaustion bath before applying this softener and keep the mangle clean during the process.
To ensure that the product quality is maintained, the container should be tightly sealed when not in use. Store at normal temperature and prevent prolonged exposure to extreme heat or freezing conditions, which may cause product separation. If separation does occur (thaw if frozen), stir the contents and use in the normal manner.
When considering the use of any UCI products in a particular application, review our latest Material Safety Data Sheets and ensure that the use you intend can be accomplished safely. For Material Safety Data Sheets and other product safety information, contact the UCI Sales Office nearest you. Before handling any other products mentioned in the text, you should obtain relevant product safety information and take necessary steps to ensure safety of use.
Dosage 1-3% on the weight of fabric Liquor Ratio 1/10-1/20 Temp. Room temperature Time 15-30 mins Drying 100-130°C
Dosage 1-3% on the weight of tabric Liquor ratio | 1/10-1/20 Ph: 4-6 Temp. Room temperature Time: 15-30 mins Drying 100-130°C
Dosage 10-30g/ Pick-up 65-85% Drying 100-130°C for 2-4 mins