Unisoft – CA

Technical Data Sheet

Product Description

UNISOFT-CA is based on fatty amide. It produces excellent soft finishes on a wide range of textile material including those from cotton, wool, Viscose, polyamide and other synthetic fibers, and their blends. Being cationic in nature it is incompatible with anionic products. It is a APEO/NPEO free product and conforms to Oeko-tex and REACH compliance as well

How to Apply

UNISOFT-CA can be used as received or pre-diluted with water before applying. The optimum treatments to reach the required softness are dependent on the fabric condition after dyeing and rinsing.

Features and Benefits

  • UNISOFT-CA gives excellent softness in finishing of cotton, polyester and their blends.
  • Gives luster and non-greasy handle on all fibers.
  • Gives excellent results on wool yarn or piece goods when it is applied as an after treatment.
  • Most lustrous and attractive soft finish is obtained with UNISOFT-CA.

Physical Properties

Appearance Cream colour paste Ionic character Cationic pH : 6.5-7.5


UNISOFT-CA can be used alone or in combination with other additives particularly in production of wash-n-wear finishes with Precondensate Resins, PVA Emulsion, Acrylic, Silicone Emulsion. The softener can also be applied by padding or exhaustion finishing processes and also during the garment washing stage.

Precautions when in use

1. Ensure that the UNISOFT-CA solution is completely homogenous before using.
2. Clean inside of pad bath or exhaustion bath before applying this softener and keep the mangle clean during the process.

Storage and Handling

To ensure that the product quality is maintained, the container should be tightly sealed when not in use. Store at normal temperature and prevent prolonged exposure to extreme heat or freezing conditions, which may cause product separation. If separation does occur (thaw if frozen), stir the contents and use in the normal manner.

Product Safety

When considering the use of any UCI products in a particular application, review our latest Material Safety Data Sheets and ensure that the use you intend can be accomplished safely. For Material Safety Data Sheets and other product safety information, contact the UCI Sales Office nearest you. Before handling any other products mentioned in the text, you should obtain relevant product safety information and take necessary steps to ensure safety of use.

Garment washing process

Dosage 1-2% on the weight of fabric Liquor Ratio 1/10-1/20 Temp. Room temperature Time 15-30 mins Drying 100-130°C

Exhaustion Process

Dosage 2-3% on the weight of fabric Liquor ratio 1/10-1/20 PH 6-7 Temp Room temperature Time 15-30 mins Drying 100-130°C


Dosage 20-30g/ Pick-up 65-85% at 50°C Drying100-130°C